Rear Stabilizer Bar; Removal / Installation - Polaris 2012 RANGER RZR 570 INTL Service Manual

BODY / STEERING / SUSPENSION

REAR STABILIZER BAR

Removal / Installation

1. Remove the cargo box access panel.
2. Remove the bushing retaining nut (A) from the upper
portion of the stab ilizer bar linkage on each side of the
vehicle.
3. Remove the (4) fasteners (B) retaining the s tabilizer
bar bracket to the frame. Remove the bushing and
bushing brackets from the vehicle.
B
4. Remove the stabilizer bar from the vehicle.
NOTE: Rotate th e st abilize b ar 18 0 de grees s o th e
linkage hole (C) is facing rearward to aid in stabilizer
bar removal.
5. Inspect the stabilizer bar for straightness. Inspect the
bushings and replace if needed.
6. Inspect the r ubber bushings on the linkage rod and
replace if needed.
7. Reverse the procedure for installation.
8. Torque the stabilizer mo
specification.
Stabilizer Mounting Bolt Torque:
18 ft. lbs. (24 Nm)
9. Torque th e bu shing re taining nu t ( A) o n the upp er
portion of the stabilizer bar linkage to specification.
Stabilizer Bushing Retaining Nut Torque:
30 ft. lbs. (40.5 Nm)
5.26
A
C
unting nuts (B) to
= T
= T
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
18 ft. lbs.
(24 Nm)
Bracket
30 ft. lbs.
(40.5 Nm)
Bushing
Linkage
37 ft. lbs.
(50 Nm)