Rocker Panels, Console And Floor - Polaris 2012 RANGER RZR 570 INTL Service Manual

10. Remove intake grill and foam filters from the LH side
of the rear storage box.
11. Remove the (7) T-25 Torx screws (E) securing intake
baffle to the rear storage box.
NOTE: Do not remove the baffle box along with the
rear storage box. The baffle box will remain with the
vehicle when the storage box is removed to prevent
damage to the crankcase vent tube.
Baffle Box
12. With the aid of an assistant, carefully lift and guide the
cargo box assembly up and off of the vehicle frame.
Make note of wire and hose routings for reassembly.

Rocker Panels, Console and Floor

Rocker Panel Removal
1. Remove the p ush ri vets an d To rx scr ews r etaining
the rocker panel and remove panel from the vehicle.
Screws
BODY / STEERING / SUSPENSION
Console and Lower Floor Removal
1. Remove both seats and rocker panels (see "Rocker
2. Remove the T27 screws retaining the console to the
3. Remove the shift
E
4. Remove the Torx screws retaining the upper floor to
5. Remove the Torx screws retaining the rear portion of
Push
Rivets
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Panel Removal").
floor.
handle knob
console.
the lower floor.
the floor and remove the lower floor from the vehicle.
and r emove the
5
5.15