Deck Lubrication; To Apply Lubricant To The Walking Belt - Reebok edge 2.2 series Owner's Manual

Table of Contents

Advertisement

DECK LUBRICATION:

The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be
checked periodically for lubrication to ensure optimal treadmill performance. Please ensure the lubrication of the
running belt is checked every 4-6 weeks after the initial 100 miles/kilometers of use.
Every 30 days or 30 hours of operation lift the sides of the walking belt and feel the top surface of the walking board as
far as you can reach.
If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow
the instructions below. Please use a non-petroleum based silicone.

To apply lubricant to the walking belt:

1.
Position the walking belt so that the seam is located on top and in center of the walking board.
2.
Insert the spray nozzle into the spray head of the lubricant can if a nozzle is required.
3.
While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board
approximately 6" from the front of the treadmill. Apply the silicone spray to the walking board, moving
from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray
approximately 4 seconds on each side.
4.
Allow the silicone to "set" for 1 minute before using the treadmill.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the edge 2.2 series and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF