Using Macros - Fujitsu control 4 0812 User Manual

To change the Toolbar Hide Delay time:
1. Select Tools-Session Options from the Video Viewer toolbar. The Session
Options window opens.
2. Click the Toolbar tab.
3. Complete one of the following steps:
• In the Toolbar Hide Delay field, type the number of seconds you want
the toolbar to be visible after the mouse cursor is removed.
• Using the Up and Down buttons, click to increase or decrease the
number of seconds you want the toolbar to be visible after the mouse
cursor is removed.
4. Complete one of the following steps:
• Click OK to accept the changes and return to the Video Viewer.
• Click X or Cancel to return to Video Viewer without making changes.
4.11

Using macros

Use the Video Viewer macro function to:
• Send a macro from a predefined macro group. Macro groups for Windows,
Linux and Sun are already defined. Selecting from the available categories
and keystrokes saves time and eliminates the risk of typographical errors.
• Change the macro group that is listed by default. This causes the macros in
the specified group to be available in the Video Viewer Macros menu.
Macro group selection are device-specific; that is, it can be set differently for each
target device.
Sending macros
To send a macro:
Select Macros from the Video Viewer menu and choose a macro from the list.
Selecting the macro group to display
You can select the macro group applicable to the operating system of the target
device.
To display macro groups in the Macros menu, complete the following steps:
1. Select Macros-Display on Menu from the Video Viewer menu.
2. Select the macro group you want to list on the Video Viewer Macro menu.
590-1059-640A
4.11 Using macros
59