Fujitsu control 4 0812 User Manual page 26

3. Explorer
b. Associate the applicable cascade switch type from the pull-down menus
for each adapter cable that has a cascade switch attached.
6. When complete, click Finish to exit the Wizard and return to the main
window. The switch is now included in the Unit list.
To discover and add a switch by IP address, complete the following steps:
1. Select Tools-Discover from the Explorer menu. The Discover Wizard opens.
Click Next.
2. The Address Range page opens. Complete one of the following steps:
• If using IPv4 mode, select Use IPv4 address range. Type the range of IP
addresses you wish to search on the network in the To Address and
From Address boxes. Use IP address dot notation: xxx.xxx.xxx.xxx.
-or-
• If using IPv6 mode, select Use IPv6 subnet, and specify the IPv6 address
and network pre-fix. Use the IPv6 "address/prefix" format.
3. You may also change the default HTTP and HTTPS port numbers, if the
switch has changed from the default on the serial console, by typing the new
port numbers in the HTTP Port and HTTPS Port fields. Click Next to continue.
4. Complete one of the following steps:
• The Searching Network progress window opens. Progress text indicates
how many addresses have been probed from the total number specified
by the range, and the number of switches found (for example, 21 of 100
addresses probed: 3 switches found). If one or more new switches are
discovered, the Wizard shows the Select Appliances to Add page. From
this page, you can select the switches to add to the local database.
-or-
• If no new switches were found (or if you clicked Stop), the Wizard shows
the No New Appliances Found page. You can try entering a different
range to search or add the switches manually.
5. Select one or more switches to add and click the Add (>) icon to move the
selection or selections to the Appliances to Add list. When the Appliances to
Add list contains all the switches you want to add, click Next.
6. The Adding Appliances progress bar window opens. Once all of the switches
have been added to the local database, the Discover Wizard Completed
20
590-1059-640A