MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-60638CA / WD-65638 / WD-65638CA /
WD-73638 / WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
Chassis Removal
1. Remove screws (A).
2. Disconnect all cables connecting to the chassis.
3. Slide the chassis out of the cabinet.
Rear Terminal Cover Removal
1. Remove nut (A) from the ANT input.
2. Remove screws (B) and (C).
3. Disconnect the connector to the PWB-AUX (V43++).
4. Remove the Terminal Cover from the chassis.
CHASSIS - REMOVAL & DISASSEMBLY
PWB-AUX
CONNECTOR
(ON REAR)
V43++ Only
B
C
A
A
Page 8
A
ANT Location:
V43C, V43 Left Side
V43+, V43++ Right Side