Initializing User Data; Updating The Wi-Fi Kit By Sd Card - Samsung MIM-H03UN User & Installation Manual

Initializing user data

f If you want to initialize all the user data to set the Wi-Fi kit as factory default status, press and hold the button (SW3) f
inside the Wi-Fi kit for 5 seconds . After releasing the button, all the lamps on the Wi-Fi kit are turned on and all the user
data is deleted .

Updating the Wi-Fi kit by SD card

f Make update directory in the SD card . Copy the latest S/W image and paste it into the update directory of the SD card . f
f Insert the SD card into the SD card slot which is located inside the Wi-Fi kit . Ⓒ
f
f Press the Reset button on the side of the Wi-Fi kit . f
f The lamp inside the Wi-Fi kit is turned on during the update . Ⓓ
f
f When the update is completed correctly, the lamp is turned off . f
f When the update is completed incorrectly, the lamp blinks . f
f When the update fails, the Wi-Fi kit returns to the previous version when it restarts . Retry the update but if it still does not f
work, take following measures .
- Change the update image(file)
- Change the SD card
- Change the PBA
CAC Wifi APP-NA_IBIIM_EN_DB68-05417A-00.indd 9
Ⓓ
Ⓒ
9
2015-03-16 오후 2:21:46