Network Configuration：setting Network Camera Environment; Setting Ip; Connecting The Camera To A Personal Computer - JVC vn-t216vpru Quick Manual

Network Setup

Setting IP

This is a network-based camera and must be assigned an IP address first.
The camera's default IP address is 192.168.0.2 and sub mask is 255.255.255.0. To change IP
address, open Network Settings page described later.
If your network uses a DHCP server, an IP address can be assigned automatically from the DHCP
server by enabling DHCP in the Network Settings page described later.

Connecting the Camera to a Personal Computer

1.
2.
3.
4.
5.
Connect the network cable to the camera and then turn on the camera's power.
Set the personal computer's IP address. The camera's default IP address is 192.168.0.2 and
sub mask is 255.255.255.0.
Check that the camera and computer are connected by pinging the IP address you have set. To
do this, start a command prompt (Windows: from the Start Menu, select Program. Then select
Accessories and choose Command Prompt.) Type: Ping 192.168.0.2. If the message "Reply
from..." appears, it means the connection is done.
Start Internet Explorer and enter IP address: 192.168.0.2. A login window will appear. Enter the
default user name: admin and password: jvc to log in.
Images of the camera can be viewed through Internet Explorer. Before viewing, follow these
steps to enable the display.
a. Enable Cookies as shown below:
 In Internet Explorer, click Internet Options on the Tools menu.
 On the Privacy tab, move the settings slider to Low or Accept All Cookies.
 Click OK.
b. When a proxy server is used, click Internet Options on the Tools menu of
Internet Explorer, select Connect tab, click LAN button, and set proxy server.
c. Change Security in Internet options as shown below:
 On tool menu, click Internet Option.
 Press the Security tab.
 If the camera operates inside the Intranet, click the Intranet icon. If the camera
operates on the Internet, click the Internet icon.
 In Windows 7 only, Click【Tools】【Internet Options】【Security】
Enable Protected Mode (require restarting Internet Explorer)  Unchecked
10