Height measurement includes feet and chassis. All features and specifications are subject to change without notice. Harman Kardon is a registered trademark, and Power for the Digital Revolution is a trademark, of Harman Kardon, Inc. *Manufactured under license from Dolby Laboratories.
AVR100 / AVR200 ELECTROSTATICALLY SENSITIVE (ES) DEVICES Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity.
Page 8
3 6 Remote Sensor 1 Main Power Switch: Press this button to to turn on the AVR 100; press it again to turn 5 Bass Control: Turn this control to modify the the unit off. Note that the Power Indicator apply power to the AVR 100.
Page 9
% AM/FM: Press this button to select the on surround modes.) positions that are used in your listening room. tuner as the AVR 100’s input source. When it is (See page 16 for more information on setup first pressed the last station tuned will be Ò...
Remote Control Functions a Device Selectors b Tuner Selector c Main Power Off Button d Sleep Button e Night Mode/Dim Switch f FM Tune Mode Button g Disk Skip Button h DVD Function Buttons i Play/Up Button j Title/CDP Button k Stop/Enter Button l Tune Down/Rewind Button m Pause/Down Buttons...
Page 12
Sleep mode. After the time tem. t Set Button: This button is used to enter shown in the display, the AVR 100 will auto- l Tune Down/Rewind Button: When the settings into the AVR 100’s menory. It is also matically go into the Standby mode.
Page 14
AVR100 / AVR200 < CPU PIN DISCRIPTION > uPD780206GF QFP TYPE Pin Name ACTIVE PORT NAME R E M A R K Pin No SYSTEM POWER SUPPLY EEPROM DATA EEPROM CLOCK PWR_LED(RED) L : Amber L : Green H : Red PWR_LED(GRN) L : STBY H : OPER L : PROT...
Page 15
AVR100 / AVR200 TUNED TUNED IN ON : "L" STEREO STEREO IN ON : "L" AVdd ANALOG POWER SUPPLY AVref ANALOG GROUND INTP3 AC3 INT REQUEST INTP2 RDS CLK RDS CLOCK IN : "L" RDS DATA RDS DATA IN INTP0 REMOCON IN SYSTEM GROUND V1 REC MUTE...
Page 18
AVR100 / AVR200 4. Timing Chart (IF Count) PLL MODE 1 PLL MODE 2 PLL MODE 3 PLL MODE 2 PLL MODE 3 PLL MODE 1 ..A dotted line ( ) : In case that IF COUNT is not proper, follow PLL MODE of When changing BAND, selecting the PRESET STATION using TEN KEY and selecting the PRESET STATION using PRESET CHANNEL UP/DOWN ...
Page 28
AVR100 / AVR200 8. Sound Field Effect (Hall, Theater) AUTODETECT Enable TEST IMPULSE Enable 2(L, R) 2(L, R) Autodetect CMPDAT/ Deemphasis (PCM) Deemphasis Test Enable Impulse FIR Enable Effects Enable 2(Ls, Rs) 5 .1 5 .1 Divider Reverb Out Effects Channel Bass Audio...
Page 29
AVR100 / AVR200 Input_X_Level Input Output Channel X Channel X HPF_X_Enable Sum_Output_X_Level LFE_X_Level To Summing Module Summing Module Fig. 5 Bass Manager Processing Unit Sum_Input_X_Level Processing Unit LPF_Enable To Subwoofer LFE_Only_Sub_Enable Input_LFE_Level Fig. 6 Subwoofer Summing Module Fig. 5 shows the processing unit on each of the output channels (except the LFE) and Fig. 6 shows the summing module used to redirect bass to the subwoofer channel.
Page 34
[6] VIDEO 3 P.C.BOARD(b) REMOVAL. AVR100/AVR200 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove the Front-panel ASS'y(AA), referring to the previous step[2]. 3. Disconnect the lead wire(CW 403,6P) from connector(CN 501) on the Input P.C.Board (m). 4. Remove 2 screws(J) and then remove the Video 3 P.C.Board(b). 5.
Page 35
[13] INPUT & PROLOGIC P.C.BOARD(m) REMOVAL. AVR100/AVR200 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove 1 screw(I) and then pull out the Bracket-pcb(22). 3. Disconnect the lead wire(2P) from connector(CN 804) on the Pre out P.C.Board(l). 4. Disconnect the connector(CN 501) from lead wire(CW 403,6P) on the Video 3 P.C. Board(b).
Page 36
[20] MAIN P.C.BOARD(j) REMOVAL. AVR100/AVR200 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove the Tuner P.C.Board(k), referring to the previous step[11]. 3. Remove the Pre out P.C.Board(l), referring to the previous step[12]. 4. Remove the Input & Prologic P.C.Board(m), referring to the previous[13]. 5.
Page 54
AVR100 / AVR200 Ref. No. Part No. Description ASS'Y-FRONT PCB CAPACITORS C401 CCAT-J473Z-AAF CAPACITOR CERAMIC 0.047uF Z 50V F T C402 CCAT-J473Z-AAF CAPACITOR CERAMIC 0.047uF Z 50V F T C404 CCAT-F103Z-AAF CAPACITOR CERAMIC 0.01uF Z 25V F T C405 CEET-J100M-CI0 CAPACITOR E/ALUMINUM 10uF M 50V 5x11...
Page 55
AVR100 / AVR200 Ref. No. Part No. Description ASS'Y-FRONT PCB RESISTORS R421 RCFT-E472J-000 RESISTOR-CARBON FILM 4.7Kohm 1/5W 5% T R422 RCFT-E472J-000 RESISTOR-CARBON FILM 4.7Kohm 1/5W 5% T R423 RCFT-E472J-000 RESISTOR-CARBON FILM 4.7Kohm 1/5W 5% T R424 RCFT-E472J-000 RESISTOR-CARBON FILM 4.7Kohm 1/5W 5% T R425 RCFT-E472J-000 RESISTOR-CARBON FILM...
Page 69
AVR100 / AVR200 Ref. No. Part No. Description BLOCK-DSP PCB CAPACITORS C1025 CCMB-J103K-0BB CAPACITOR CHIP/MULT 0.01uF K 50V X7R B C1026 CCMB-J103K-0BB CAPACITOR CHIP/MULT 0.01uF K 50V X7R B C1028 CCMB-J104Z-0BF CAPACITOR CHIP/MULT 0.1uF Z 50V F B C1029 CCMB-J220J-0BZ CAPACITOR CHIP/MULT 22PF J 50V Z B C1030...
Page 70
AVR100 / AVR200 Ref. No. Part No. Description BLOCK-DSP PCB CAPACITORS C1099 CEET-E100M-AC0 CAPACITOR E/ALUMINUM 10uF M 16V 3.5x5 C1100 CEET-E100M-AC0 CAPACITOR E/ALUMINUM 10uF M 16V 3.5x5 C1101 CEET-E100M-AC0 CAPACITOR E/ALUMINUM 10uF M 16V 3.5x5 C1102 CEET-E100M-AC0 CAPACITOR E/ALUMINUM 10uF M 16V 3.5x5 C1103 CEET-E100M-AC0...
Page 71
AVR100 / AVR200 Ref. No. Part No. Description BLOCK-DSP PCB RESISTORS R1011 RCPB-B103J-21C RESISTOR-CHIP C/FILM 10Kohm 1/10W 5% B R1012 RCPB-B103J-21C RESISTOR-CHIP C/FILM 10Kohm 1/10W 5% B R1013 RCPB-B103J-21C RESISTOR-CHIP C/FILM 10Kohm 1/10W 5% B R1014 RCPB-B103J-21C RESISTOR-CHIP C/FILM 10Kohm 1/10W 5% B R1015 RCPB-B103J-21C RESISTOR-CHIP C/FILM...
Page 72
AVR100 / AVR200 Ref. No. Part No. Description BLOCK-DSP PCB RESISTORS R1086 RCPB-B561J-21C RESISTOR-CHIP C/FILM 560ohm 1/10W 5% B R1087 RCPB-B561J-21C RESISTOR-CHIP C/FILM 560ohm 1/10W 5% B R1088 RCPB-B561J-21C RESISTOR-CHIP C/FILM 560ohm 1/10W 5% B R1089 RCPB-B332J-21C RESISTOR-CHIP C/FILM 3.3Kohm 1/10W 5% B R1090 RCPB-B332J-21C RESISTOR-CHIP C/FILM...
Need help?
Do you have a question about the AVR 100 and is the answer not in the manual?
Questions and answers