Height measurement includes feet and chassis. All features and specifications are subject to change without notice. Harman Kardon is a registered trademark, and Power for the Digital Revolution is a trademark, of Harman Kardon, Inc. *Manufactured under license from Dolby Laboratories.
Page 3
AVR100 / AVR200 ELECTROSTATICALLY SENSITIVE (ES) DEVICES Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity.
Page 8
Front-Panel Controls ˘ ˆ ¸ ¯ ˜ Volume Speaker Channel Dig. Select Delay COAX DIGITAL SLEEP TAPE VID 1 VID 2 VID 3 6 CH. AM/FM TUNING PRESET SCAN PRESET FM MODE DIGITAL PRO LOGIC 3-STEREO HALL THEATER TEST TONE SURR.
Page 9
Front-Panel Controls 8 Video 3 Inputs: These audio/video inputs & Preset Scan: Press this button to automat- (See pages 22–24 for complete information on setting the output levels.) may be used for temporary connection of video ically scan through the stations that have been games, camcorders, digital still cameras or programmed in the AVR 100’s memory.
Remote Control Functions a Device Selectors b Tuner Selector c Main Power Off Button d Sleep Button e Night Mode/Dim Switch f FM Tune Mode Button g Disk Skip Button h DVD Function Buttons i Play/Up Button j Title/CDP Button k Stop/Enter Button l Tune Down/Rewind Button m Pause/Down Buttons...
Page 12
Remote Control Functions IMPORTANT NOTE: The AVR 100’s remote is f Tuner Mode: Press this button when the scroll down through the list of stations that shipped from the factory to control all of the have been entered into the preset memory. tuner is in use to select between automatic functions of the AVR, as well as most Harman When a CD or DVD player is in use, this button...
Page 14
AVR100 / AVR200 < CPU PIN DISCRIPTION > uPD780206GF QFP TYPE Pin Name ACTIVE PORT NAME R E M A R K Pin No SYSTEM POWER SUPPLY EEPROM DATA EEPROM CLOCK PWR_LED(RED) L : Amber L : Green H : Red...
Page 15
AVR100 / AVR200 TUNED TUNED IN ON : "L" STEREO STEREO IN ON : "L" AVdd ANALOG POWER SUPPLY AVref ANALOG GROUND INTP3 AC3 INT REQUEST INTP2 RDS CLK RDS CLOCK IN : "L" RDS DATA RDS DATA IN INTP0...
Page 28
AVR100 / AVR200 8. Sound Field Effect (Hall, Theater) AUTODETECT Enable TEST IMPULSE Enable 2(L, R) 2(L, R) Autodetect CMPDAT/ Deemphasis (PCM) Deemphasis Test Enable Impulse FIR Enable Effects Enable 2(Ls, Rs) 5 .1 5 .1 Divider Reverb Out Effects...
Page 29
AVR100 / AVR200 Input_X_Level Input Output Channel X Channel X HPF_X_Enable Sum_Output_X_Level LFE_X_Level To Summing Module Summing Module Fig. 5 Bass Manager Processing Unit Sum_Input_X_Level Processing Unit LPF_Enable To Subwoofer LFE_Only_Sub_Enable Input_LFE_Level Fig. 6 Subwoofer Summing Module Fig. 5 shows the processing unit on each of the output channels (except the LFE) and Fig. 6 shows the summing...
Page 34
[6] VIDEO 3 P.C.BOARD(b) REMOVAL. AVR100/AVR200 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove the Front-panel ASS'y(AA), referring to the previous step[2]. 3. Disconnect the lead wire(CW 403,6P) from connector(CN 501) on the Input P.C.Board (m). 4. Remove 2 screws(J) and then remove the Video 3 P.C.Board(b).
Page 35
[13] INPUT & PROLOGIC P.C.BOARD(m) REMOVAL. AVR100/AVR200 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove 1 screw(I) and then pull out the Bracket-pcb(22). 3. Disconnect the lead wire(2P) from connector(CN 804) on the Pre out P.C.Board(l). 4. Disconnect the connector(CN 501) from lead wire(CW 403,6P) on the Video 3 P.C.
Page 36
[20] MAIN P.C.BOARD(j) REMOVAL. AVR100/AVR200 1. Remove the Chassis-top(35), referring to the previous step[1]. 2. Remove the Tuner P.C.Board(k), referring to the previous step[11]. 3. Remove the Pre out P.C.Board(l), referring to the previous step[12]. 4. Remove the Input & Prologic P.C.Board(m), referring to the previous[13].
Page 54
AVR100 / AVR200 Ref. No. Part No. Description ASS'Y-FRONT PCB CAPACITORS C401 CCAT-J473Z-AAF CAPACITOR CERAMIC 0.047uF Z 50V F T C402 CCAT-J473Z-AAF CAPACITOR CERAMIC 0.047uF Z 50V F T C404 CCAT-F103Z-AAF CAPACITOR CERAMIC 0.01uF Z 25V F T C405 CEET-J100M-CI0...
Page 55
AVR100 / AVR200 Ref. No. Part No. Description ASS'Y-FRONT PCB RESISTORS R421 RCFT-E472J-000 RESISTOR-CARBON FILM 4.7Kohm 1/5W 5% T R422 RCFT-E472J-000 RESISTOR-CARBON FILM 4.7Kohm 1/5W 5% T R423 RCFT-E472J-000 RESISTOR-CARBON FILM 4.7Kohm 1/5W 5% T R424 RCFT-E472J-000 RESISTOR-CARBON FILM 4.7Kohm 1/5W 5% T...
Need help?
Do you have a question about the AVR200 and is the answer not in the manual?
Questions and answers