At The End Of Programme; Switching Off The Unit; Unloading The Dishwasher - Kenwood KDW4TTSL Instruction Manual

4. The display window shows the running time of the dishwasher.
a) "0:00" means the unit is on stand by mode.
b) "H:MM" and not blinking means the unit is on pause.
c) "H:MM" and blinking means the unit is running.
at the end of a programme
At the end of a programme, the unit will sound and the display window
will return to "0:00".
NOTE: It is advisable to leave the door closed until you are ready to
unload the crockery. You can also open the dishwasher door fully
until the dishes and crockery are cool enough to unload. Do not
leave the door only partially open.

switching off the unit

For energy saving, remember to switch the dishwasher off using the "off"
button. The dishwasher will continue to use electricity until it is switched
off with the "off" button.
If the dishwasher is not going to be used for a long period of time, e.g.
whilst on holiday, disconnect the unit from the mains supply.

unloading the dishwasher

Allowing dishes to cool down before unloading is important as dishes
tend to break and chip more easily when they are hot. Therefore, if you
open the dishwasher door fully after switching off, it will allow the dishes
to cool down much faster.
CAUTION!
The "High temperature" indicator will illuminate on the LCD display when
the water temperature is higher than 50°C.
Always take care when opening, loading and unloading the dishwasher
when this indicator is illuminated.
GB-
Kenwood KDW4TTSL_IB_GB_090828.in22 22 28/08/09 12:03:03 PM