Advertisement
Available languages
Available languages
Illustrations & Connectivity
Remote control
9. Standby/ON
10. Volume up
9
11. Volume down
10
12. Battery compartment
11
Battery loading:
12
Insert a coin into the slot and rotate anti-clockwise to open the battery
compartment, install the new CR 2025 battery and rotate the cover
clockwise to close the compartment.
Note:
1. Do not place the remote control in places that are hot and humid.
2. Do not charge the batteries.
Open
Close
3. Remove the batteries when unused for long period of time.
4. The battery should not be exposed to excessive heat such as
direct sun, fire or similar.
Connectivity
5
English
Aux In
DC In (18V)
L Spk Out
Spk In
Bluetooth
EDIFIER Luna Eclipse
→ Set you device (mobile phone, tablet device, MP3/MP4 player etc.) to search and select "EDIFIER Luna Eclipse".
→ Pair your device with "EDIFIER Luna Eclipse".
→ When the connection is made, the input indicator will change to blue.
→ Play the audio on your paired device and adjust the volume to a desired level.
In Bluetooth Mode
Track001
Track002
Track003
...
To skip to the next track:
Slide from
to
.
2"
To disconnect Bluetooth:
Touch and hold "
,
Note: When the Bluetooth is disconnected, the system will automatically switch
to AUX mode.
Note:
1. To enjoy the full Bluetooth functions of this product, please ensure your mobile device has A2DP & AVRCP profile.
2. PIN code for connection is "0000" if needed.
Operational guide
blue
Track001
Track002
Track003
...
To revert to the previous track:
Slide from
to
.
,
" at the same time for approximately 2 seconds.
6
English
Advertisement
Need help?
Do you have a question about the LUNA ECLIPSE e25 and is the answer not in the manual?
Questions and answers
I lost the remote. How do I switch inputs to optical from bluetooth? It only shows green light.
The EDIFIER Luna Eclipse e25 has touch-sensitive controls on the side of the main speaker. To switch inputs from Bluetooth to Optical without using the remote, use the touch controls to cycle through the available input options.
This answer is automatically generated