Sharp LC-19SK25U Service Manual page 42

LC-19SK25U/U-W
LC-19SB25U/U-W
LC-19SB15U
LC-19D45U
5. On Setting Items
* "EZ-SETUP" discussed below indicates "EZ-SETUP after the first power-on".
(1) POWER ON FIXED
Selection
Selection between
Default Variable
Explanation "
In
ceived. The power can be turned off by stopping the power supply from AC.
Limit in Setting
Refer to the
Exception None
Remarks
(2) MAXIMUM VOLUME
Selection Adjustment from 0 to 60 (no loop)
Default
60
Explanation Sound volume can not be adjusted higher than the preset value.
Limit in Setting When the sound volume is set lower than 59, only figures are displayed and the sound volume bar is
•
not displayed.
The maximum sound volume for ON-timer (Wake up timer) is limited also to the preset value.
•
Exception None
Remarks
In line output (sound volume variable), the sound volume can be adjusted from 0 to 60 irrespective of
•
pre-adjusted value.
When the sound volume is set higher than the MAX setting by the adjusting process, the sound volume
•
control operation is prohibited for turn-up and the sound volume should be turned down to MAX in this
state.
(3) VOLUME FIXED
Selection Selection between "Variable" and "Fixed" (loop provided)
Default Variable
Explanation Sound volume is fixed and made invariable.
Limit in Setting The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the
•
setting is made impossible. (Basically, the menu is not displayed.)
The following keys become invalid:
•
•
•
Exception None
Remarks • In line output (sound volume variable), the sound volume can be adjusted from 0 to 60 irrespective of
pre-adjusted value.
As for sound volume fixing and sound volume MAX level, the sound volume fixing has priority.
•
Once the sound volume has been changed by adjustment process, it should be set back to the sound
•
volume preset by sound volume fixing level when the adjustment process ends .
(4) VOLUME FIXED LEVEL
Selection Adjustment from 1 to 60 (no loop)
Default 60
Explanation
The sound volume to be fixed by
Limit in Setting None
Exception None
Remarks
Setting is valid only when
" "
Variable and
"
Fixed setting, the power-off by the power key of the unit is invalidated and the image is kept being re-
" "
Power-On Fixed sheet.
Sound volume Up/Down (VOL +/-) [for both remote control and the unit]
Mute (MUTE)
"
Volume fixed
" "
Fixed (loop provided)
" "
Volume fixed is determined.
" " "
is selected for fixed
42
.