Contents Contents ������������������������������������������������������������������ 1 Automatically switch the TV to standby introduction ������������������������������������������������������������� 2 (Sleeptimer) ........13 Dear SHARP customer ........2 Automatically switch the TV on (On timer) Important Safety Precautions ......2 ............13 Remote control unit .......... 3 Use TV lock ..........
Dear SHarp customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. important Safety precautions •...
introduction remote control unit 25 SiZe 1 B poWer Press this button to change the Press to turn the LCD TV on or font size: Full screen, Top half and enter standby mode. Bottom half. 2 b (input SourCe) 26 SuBpaGe Select an input source.
Page 6
introduction tV (Front view) Remote control sensor B (Standby/On) indicator tV (rear view) i (k/l) Volume buttons PC IN AUDIO 75Ω SCART COMPONENT AV OUT p (r/s) VIDEO AC IN Programme [channel] buttons menu button b (INPUT SOURCE) button PC IN AUDIO 75Ω...
preparation 1� Put the TV face down on a safe surface that is Supplied accessories covered by a soft and smooth cloth. 2� Adjust the TV stand to the bottom of the TV. Stand unit and Screws 3� Fasten screws by using a cross-head screwdriver (Not supplied).
preparation installation of batteries using the remote control unit 1� Insert two AAA batteries into Remote control. Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote Make sure (k) and (l) are facing the proper control unit and sensor may prevent proper operation.
Quick guide initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Start searching channels Start automatic installation. This takes a few minutes. power on and run Start ? preparation...
Watching tV note Daily operation • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power turning on/off the power outlet. Press a on the TV. •...
Watching tV teletext What is Teletext? Buttons Description Teletext broadcasts pages of information and entertainment to specially equipped television sets. SuBpaGe Select the subpage when the Your TV receives Teletext signals broadcast by a TV current page contains subpage(s). network, and decodes them into graphical format for Press SUBPAGE buttons on viewing.
tV menu picture use smart picture • noise reduction: Filters and reduces the noise in the picture. • Colour temperature: Sets the colour 1� Press ViDeo (aDJ). temperature to Cool (bluer), Normal (balanced), Smart picture menu appears. Warm (redder). 2� Press oœ...
tV menu Change picture format Change the picture format to suit your content. Wide screen: Stretches the classic 4:3 format to 16:9. 1� Press f on your remote control. Alternatively, press menu and select picture > picture format. unscaled: Allows maximum sharpness.
tV menu Sound • mono/Stereo: Selects between mono or stereo if stereo is broadcast. • Surround: Enables spatial sound. use smart sound • auto volume: Automatically reduces sudden volume changes, for example, when switching Use smart sound to apply pre-defined sound settings. channels.
tV menu automatically switch the tV to standby Set / change code (Sleeptimer) 1� Press menu� Sleeptimer switches the TV to standby after a defined period of time. 2� oœpπ to select Features > Set Press code. 1� Press menu. 3�...
tV menu note • If you select lock, you have to enter your code every time you turn on your TV. • Once you set the code, step 3 and 4 won’t appear before turn off the TV. lock or unlock one or more channels 1�...
tV menu installation install channels The first time you set up your TV, you are prompted to select a menu language and to install TV. Menu This chapter provides instructions on how to reinstall and fine tune channels. Menu language Channel assistant Picture Channel install.
tV menu Fine tune analogue channels manually install channels You can manually fine tune analogue channels when This section describes how to search and store reception is poor. analogue TV channels manually. 1� Press menu. 1� menu. Press 2� Select installation >...
tV menu 6� Press oK to confirm each of the characters. note • Select none if you do not want to map to the decoder/ descrambler channel. • SCart2 is available only in TVs of 26 inches and larger. note •...
Connecting external devices Before connecting ��� (Ypbpr) Component connection • Be sure to turn off the TV and any devices before making any connections. example of connectable devices • Firmly connect a cable to a terminal or terminals. E VCR E DVD E Blu-ray player/recorder •...
Connecting external devices SCart connection example of connectable devices example of connectable devices E Decoder E VCR E DVD recorder When using the SCart 1 When using the SCart 2 Full SCART, which transmits RGB, and CVBS in, and Half SCART, which transmits CVBS in, and CVBS CVBS tuner out.
Connecting external devices Connecting a pC Supported display resolutions HDmi Connection Computer formats (pC) PC IN PC IN AUDIO AUDIO Resolution Refresh rate HDMI cable 640 x 480 60Hz 800 x 600 60Hz, 72Hz, 75Hz 1024 x 768 60Hz 1280 x 720 60Hz 1280 x 768 60Hz...
appendix troubleshooting problem possible Solution No picture Connect power cord correctly. Turn on power. Connect signal cable correctly. Press any button on the LCD TV. Abnormal colours Connect signal cable correctly. Twisted picture Connect signal cable correctly. Please use compatible signal. Picture too dark Adjust brightness and contrast.
0°C to k40°C • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.
If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling.