Table of Contents
Advertisement
VisuaLink 128/384 User Guide
CAMERA
CONTROL
ENTER
NDA-24230 Issue 2.0
The setting screen is displayed. The current setting is displayed.
Video format
Video coding
Video priority
Camera type
Video source
MUTE function : <Audio and Video>
Press ENTER after choosing.
Video format:
Sets the video format. Possible settings are:
FCIF:352 x 288 or QCIF:176 x 144
Video Coding:
Sets the default coding rate. Possible settings are:
H.261 or H.263
Video priority:
Sets the default video coding transmission rate. Possible settings
are:
Motion: more of the bandwidth dedicated toward fps.
Resolution: more of the bandwidth dedicated toward resolution.
Camera mod:
Sets the type of camera to be controlled. Possible settings are:
EVI-D30 or VC-CI
Video 1 and 2:
Operate together. Sets which of the video inputs labeled on the
back of the VisuaLink are to be camera 1 or 2.
MUTE function Sets the audio to a mute or sets the audio and video to mute.
Note 1: To select an item use the up and down portion of the CAMERA
CONTROL button.
Note 2: To change a setting use the left and right portion of the CAMERA
CONTROL button to toggle through the item.
Press ENTER button to define it after changing a setting.
Note: After changing a setting, please turn off the power and on again.
Press the MENU or CANCEL button three (3) times to proceed back to the
video image.
: < FCIF>
: < H263 >
: < Motion >
: < EVI-D30 >
VIDEO1
: < Camera1 >
VIDEO2
: < Camera2 >
Chapter 5
Page 5-7
Advertisement
Table of Contents
