Table of Contents
Advertisement
VisuaLink 128/384 User Guide
CAMERA
CONTROL
ENTER
NDA-24230 Issue 2.0
Press ENTER after choosing.
PIP position: Sets the display position for PIP on the monitor screen. Possible
settings are:
Top right
Top left
Bottom right
Bottom Left
PIP format:
Sets the video image to be displayed in PIP.
Non_Mirror: displays the video image as is
Mirror: displays the video image as it would be seen in a mirror
PIP of Snap: Sets the display image to be shown in the PIP when a snapshot is
displayed on the screen.
Send: displays the motion video image that is sent to the far-end
Receive: displays the motion video image being transmitted by the
far-end
Move the cursor up and down with CAMERA CONTROL button to select
the appropriate option.
Press the left or right side of the CAMERA CONTROL button to toggle
through all the possible settings.
PIP position
: <Bottom right>
PIP format
: <Mirror
PIP of Snap
: <Receive
Chapter 7
>
>
Page 7-5
Advertisement
Table of Contents
