NEC USB User Manual page 9

203 Eng Fr Cndn manual
MultiSync
MultiSync XE15, XE17, XP15, XP17, XV17, XV17+, A500, A500+ A700,
A700+, A900, E500, E700, E900, E900+, M500, M700 and P750
Step 1 With the monitor
unplugged from your
system and wall
outlet, carefully
turn the monitor
upside down on
a firm table so that
the base is facing
up as shown
in Figure 1.
Step 2 Using your thumbs, push on the locking tabs while pulling forward
and up as shown by the directional arrow in Figure 3A. This
action releases the base from the monitor. Remove and save the
original base for possible future use.
BASE
12/21/98 11:20 AM Page 9
Monitor Model Names
®
MONITOR IN POSITION TO
REMOVE THE BASE AND ATTACH
INTELLIBASE USB HUB AND AUDIO
Figure 1
Figure 3A
LOCKING
TABS
5
BASE