Battery Pack Removal And Replacement - Gtech SW04 Safety And Instruction Manual

Battery Pack Removal & Replacement
The battery pack is removable and replaceable
At the end of the product's or battery's life the battery should be removed for
disposal and recycling. Only a technically competent person should undertake
battery removal and replacement. If uncertain as to how to replace your battery
pack, we suggest you take your unit to a reputable small appliance service
technician to have this service performed.
Follow these steps for battery removal or replacement:
Screw
Battery Cover
Underside
of Sweeper
1 Switch off the product and ensure the Charger is disconnected.
2 Remove the Telescopic Tubes and Dust Tray.
3 Turn the unit over, being careful not to switch the product on.
4 Using a #1 Phillips screwdriver unscrew the battery cover.
5 Carefully lift the battery out.
6 Slide the plastic cover off the black (-) cable connector.
7 Push the latch on the connector and pull the connector off the battery contact.
8 Repeat for the red (+) cable connector.
9 Push the cable connectors onto the new battery contacts, ensuring they are
securely fitted.
10 Slide the plastic covers back over the connectors.
11 Replace the battery into the compartment and refit the battery cover and screw.
WARNING: NEVER touch both the metal battery contacts at the same time
with any metal objects as this may create sparks that can cause small burns.
WARNING: NEVER use the unit in a partially assembled state.
Replacement batteries can be purchased from Grey Technology:
Tel: 01905 345891 www.gtechonline.co.uk
ONLY USE A REPLACEMENT BATTERY AS SUPPLIED BY MANUFACTURER
10
helpline 01905 345891 email support@greytechnology.co.uk web www.gtechonline.co.uk
Connector
Cover
Cable
Connector
Cable
Connector
Latch
Battery Connector