Setting alarm times
Your clock radio has two alarms which can be set to wake you to DAB,
FM radio, iPod or beep type alarm. Each alarm can be set to sound once,
daily, on weekdays or at weekends. The alarms may be set while the unit
is in Standby mode or while playing. Alarms will be retained in the event
of a power failure.
Note: If no buttons are pressed for 10 seconds, your clock radio will exit
the alarm setup. To exit the alarm setup at any time press and release
the alarm button.
•
To switch the alarm on or off without changing the other alarm settings
press the Alarm 1 or 2 button and then press the Tuning Up or Down
buttons to toggle On or Off. Then press Select button to save.To
change any other alarm settings follow the procedure below.
1. Press and release the Alarm 1 or 2 button. 'Alarm 1 Setup' will show
on the display. Press and release the Select button to enter the alarm
setup.
2. Press the Tuning Up or Down buttons to select On or Off. If Off is
selected any current setting for that alarm will be cancelled.
3. With 'On' selected, press and release the Select button to cause the
alarm hour digits to fl ash on the display.
4. Press the Tuning Up or Down buttons to choose the desired alarm
hour. Press and hold the Tuning Up or Down buttons to advance the
time quickly.
5. Press and release the Select button to enter the hour setting. The
alarm minute digits will fl ash on the display.
1
2-4
2-4
1-5
26
Need help?
Do you have a question about the DreamDock 2 and is the answer not in the manual?
Questions and answers