Pioneer BDP-05FD Service Manual page 35

5
QQ
3 7 63 1515 0
OSD Filter Setting
* The details of this section are to be determined later after register specifications are determined.
To display the Service Indication screen, press the ESC then DISP keys. Then press the DIG/ANA key once to switch to
the OSD Filter Setting screen. The above key inputs can be accepted either in Normal Startup mode or Checker mode.
• OSD Filter Setting screen
1
1 OSD Filter Setting value
Key operations of the OSD Filter Setting screen
Key
[<x3], [x3>]
TE
L 13942296513
[ESC]
* Use the remote control unit for service for key operation.
* A setting becomes valid as soon as it is set. The setting value will be stored in nonvolatile memory, as with the setting
values of the main unit. Therefore, the changed setting value will be retained upon the next power-on.
* About factory preset
• If the ESC then CLEAR keys are pressed ("No power off" command) for factory presetting, the setting will be reset to
default (ON).
• If the STOP and POWER keys on the main unit are pressed simultaneously for factory presetting, the current setting
will be retained.
www
.
5
http://www.xiaoyu163.com
6
ON
OFF
Operation
For switching the OSD Filter Setting between
ON or OFF
For clearing data or exiting the current mode
x ao u163
y
i
6
http://www.xiaoyu163.com
7
2 9
8
Setting value
(*: Default)
[<x3]: To set the OSD Brightness Filter to OFF
OFF/ON ( * )
[x3>]: To set the OSD Brightness Filter to ON
Q Q
3 − 6 7 1 3 1 5 −
co
.
BDP-05FD
7
8
9 4 2 8
Remarks
0 5 8 2 9 9 4 2 8
m
8
9 9
A
B
C
9 9
D
E
F
35