NEC SL1100 Programming Manual page 159

ISSUE 6.0
Item Item
No.
40 Calling name dis-
play info via
trunk for stand-
ard SIP
41 Time Zone(hour)
43 Video Mode
44 Using STD-SIP
Display for CPN
45 NAT plug & play
47 Registration Ex-
pire Timer for
NAT (V4.0
Changed)
48 Subscriber Ex-
pire Timer for
NAPT (V4.0
Changed)
49 Receiving SIP IN-
FO (V4.0 Added)
Conditions
None
Feature Cross Reference
None
Programming Manual
Input Data
0 = Both name and
number
1 = Name only
2 = Number only
3 = None
0 ~ 24
(- 12 ~ + 12 hour)
0 = Disable
1 = Enable
0 = Disable
1 = Enable
0 = OFF Effect this program only when PRG
1 = ON 10-46-14 (for DR700) or PRG
10-33-05 (for Standard SIP Termi-
nal) are set to NAT mode. (V4.0 or
higher)
If you are setting the SIP Terminal
using remote router by turning this
setting ON you don't need to set the
Port Forward on remote router side.
(V4.0 Added)
Select sending RTP port number to
remote Router, use from negotiation
result (0) or received RTP packet (1)
0 = Disable On a per station basis, this setting
60 ~ 65535 (sec) defines the SIP registration expiry
timer. This setting applies to DR700
stations or Standard SIP Terminal
connected via NAPT. If this value is
set to 0, for a NAPT terminal, the
value in PRG 84-23-01 (for DR700)
or PRG 10-33-01 (for Standard SIP
Terminal) are applied.
0 = Disable On a per station basis, this setting
60 ~ 65535 (sec) defines the SIP subscribe expiry
timer. This setting only applies to
DR700 stations or Standard SIP
Terminal connected via NAPT. If this
value is set to 0, for a NAPT termi-
nal, the value in PRG 84-23-02 (for
DR700) or PRG 10-33-01 (for
Standard SIP Terminal) are applied.
0 = Disable Enables to receive a SIP INFO mes-
1 = Allowed any time sage from a standard SIP phone as
2 = Allowed while RTP a dial information.
is not available
Description Default
SL1100
Related
Program
0
12
0
0
Program
1 10-46-14
15
180 84-23-01
180 84-23-02
2
2-139