Software Registration And Activation - Navigon MN4 User Manual

2.2.3

Software registration and activation

Activation code
Installation and quick-start guide
code.
Notice: Depending on the battery charging state, it may happen
that you have to charge the device for a while before the
installation may be executed.
At the first start of MobileNavigator you will be prompted to
enter an activation code. You cannot start the software without
entering this code.
To obtain the activation code, you will need the serial number,
which is printed on the back of the MobileNavigator booklet and
the Hardware-ID, which is indicated at the first start of the
software.
With these two numbers you may obtain the activation code:
in the web on www.navigon.com
by SMS: simply send the serial number, device ID, your first
name surname and email address (separated by commas) to:
+49 (0) 176 – 888 333 88 or
by phone from our support staff:
+49 180-5-6284466 (dtms-Service, 0,12 €/min).
User's manual BLUE Edition
- 12 -