Playing Back Ipod Music - Yamaha YIT-W12 Owner's Manual

Playing back iPod music

1
Check that the transmitter and your Yamaha product are set
to the same group ID.
2
Connect your iPod to the transmitter.
A wireless connection between the transmitter and your Yamaha product
will be established.
3
Start playback on your iPod.
Your Yamaha product automatically selects the transmitter (YIT) as the
input source and starts to play the iPod audio.
NOTE
• When disconnecting the iPod from the transmitter, pull the iPod upward slowly.
• The transmitter uses the battery of the iPod as the power source. Charge the
battery of the iPod if it runs out. Also, disconnect the iPod from the transmitter
when the transmitter is not in use. Otherwise, the battery may drain faster.
HINT
• Your Yamaha product automatically turns on if you start playback on your iPod.
• Some Yamaha products will terminate the wireless connection and turn off
automatically if a certain period of time elapses after iPod playback is stopped.
• To adjust the volume, use the volume controls on your Yamaha product or iPod.
(Volume adjustments will be reflected on one another.)
• You can enjoy videos on the iPod screen.
4
En
(Flashes green rapidly)
iPod recognition in progress
(Flashes green slowly)
preparing for a wireless connection
(Lights up green)
wireless connection established
(Flashes red)
iPod low battery or error indication (p.7)