This equipment generates/uses radio frequencies and, if not The above statements apply ONLY to those products installed and used according to the instructions found in the distributed by Yamaha Corporation of America or its users manual, may cause interference harmful to the subsidiaries.
Page 3
Be sure to use this product only in the country in where Yamaha will not be held responsible for any it was purchased. damage resulting from use of this unit with a voltage other than specified.
■ Introduction ■ Using YIT-W10 YIT-W10 is a wireless transmitter designed for iPod 1 Connect the AC adapter to PDX-50BC or iPhone series. YIT-W10 employs the Yamaha (charging cradle) and then connect the “yAired” technology to establish a wireless AC plug to the AC wall outlet.
Page 5
Adjusting the volume level. once • PDX-50TX supports “1” (A1), “2” (A2), and “3” Lights up A connection is established. (A3) on some Yamaha products that support green You are ready to start “yAired”. playback of iPod on another ■ Disconnecting the iPod or Yamaha product.
Refer to the table below if the unit does not function properly. If the problem you are experiencing is not listed below, or if the instruction below does not help, contact the nearest authorized Yamaha dealer or service center. Problem...