Adding Measurements To An Ni-Motion Application - National Instruments NI-Motion User Manual

Chapter 2 Creating NI-Motion Applications

Adding Measurements to an NI-Motion Application

NI-Motion User Manual
Getting Started with NI-Motion
for NI 73xx Motion Controllers
Measurement & Automation
Explorer Help for Motion
Part III:
Programming with NI-Motion
Figure 2-1. Generic Steps for Designing a Motion Application
Figure 2-2 illustrates an expanded view of the topics covered in Part III,
Programming with NI-Motion, of this manual. For information about items
in the diagram, refer to Chapter 12, Synchronization.
Determine the system requirements
required mechanical system
Configure the controller using
Test the motion system
Add measurements with data
and/or image acquisition (optional)
2-2
Determine the
Connect the hardware
MAX
Plan the moves
Create the moves
ni.com