Panasonic DBS Section 540 Reference Manual page 97

Programming
Parameter
Description
Address
Options
Parameter
Description
Address
Options
DBS-2.3/9.2-540
Overseas Call
Use this address to allow or deny international calling on
incoming network trunk group calls as follows:
• When a network caller attempts an overseas call
(trunk access + 01 or 011) on a trunk assigned TRS
type 3-6, the system checks the setting in this
address (default=deny call).
• However, if this address is set to "1", the system
checks the "International Calling For TRS Types 3-
6" (FF7 1# 1#) to see if the dialed country code
should be checked against the Country Code Table
(FF7 1# 20#) before allowing the call. If so, and if
the dialed country code is included in the table, the
call is allowed.
FF1 8# 4# 8# 3# (NWG)# 24# (0/1)#
0=Deny call
1=Check the International Calls Switch (FF7 1# 1#)
Network Trunk Group Settings
Assigns a network trunk to network trunk group.
FF1 8# 4# 8# 4# (TRK#) (0-3)#
0=Not Assigned to a Network Trunk Group
1=Network Trunk Group 1
2=Network Trunk Group 2
3=Network Trunk Group 3
T1 Networking - Revised April 2000
T1 Settings Added for Networking
Page 97