Cannondale en 14764 Supplemental Owner's Manual
  1. Manuals
  2. Brands
  3. Cannondale Manuals
  4. Bicycle
  5. en 14764
  6. Supplemental owner's manual
Cannondale en 14764 Supplemental Owner's Manual

Cannondale en 14764 Supplemental Owner's Manual

E series
Hide thumbs

Advertisement

Table of Contents

129184
E-SERIES.
OWNER'S MANUAL SUPPLEMENT.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the en 14764 and is the answer not in the manual?

Questions and answers

Related Manuals for Cannondale en 14764

Summary of Contents for Cannondale en 14764

  • Page 1 129184 E-SERIES. OWNER’S MANUAL SUPPLEMENT.
  • Page 2 In this supplement, particularly important information is presented in the following ways: Indicates a hazardous situation which, if not WARNING avoided, could result in death or serious injury. Indicates special precautions that must be NOTICE taken to avoid damage. A TIP provides helpful information. This manual meets EN standards 14764, 14766, and 14781.

  • Page 3: Table Of Contents

    Be sure to obtain and read all of them. headshok sUsPensIon fork....18 If you need a manual or supplement, or have a question about your bike, please contact your Cannondale Dealer maIntenanCe ..........20 immediately, or call us at one of the telephone numbers listed on the back cover of this manual.

  • Page 4: Safety Information

    It is not a moped or motorcycle. In EU contries, (including fitting your bike with additional equipment) it is known legally as an “EpaC” cycle or Electrically necessary to comply with local laws. ask your Cannondale powered assisted Cycle. Dealer for more information about operating an electrically assited pedal bicycle in your area.
  • Page 5 Disconnect the battery from the charger unit when fully you must read and follow the BosCH battery and charger. charged. Do not leave a fully charged battery connected instructions. Go to : http://www.cannondale.com/ to the charger. Unplug the charger from the wall outlet manual_ebikes/ when not in use.

  • Page 6: Parts Of The E-Series Bike

    Parts of the e-serIes BIke frame figure 1. 1. BosCH Drive Unit 9. Headshok stem 18. BosCH speed sensor 2. BosCH Battery 10. lockout lever 19. Rear Cassette 3. BosCH HMI Unit 11. Bell 20. Front Chainring 4. Headshok Fork 12.
  • Page 7 (e.g. drive chain, front chain ring, rear cassette, rear derailleur, crankarm) must be serviced by your Cannondale Dealer. Replacement parts must be identical to the original Cannondale specification for the bike. see specifications. Failure to replace components with original specification can result in serious overload or other damage to the drive unit.
  • Page 8 BosCh handlebar mounted Interface (hmI) TURBO SPORT TOUR KM/H PMWH KM/H Reichweite Indication elements, drive hmI 1. Display-function button “i” 11. Display-function button “i” on the a. Motor-output indicator 2. Illumination button operating unit 3. Drive HMI 12. Reduce value/scroll down button “–” b.
  • Page 9 E-Series Owner’s Manual Supplement - 129184.PDF BosCh lithium Ion Battery Pack / Charger 19. Holder of the rack-type 25. Upper holder of the standard 31. plug-in connector battery pack battery pack 32. Ventilation openings 20. Rack-type battery pack 26. standard battery pack 33.
  • Page 10 BosCh technical data eBike system PowerPack PowerPack Drive Unit Drive Unit Cruise lithium ion battery pack 0 275 007 006/ article number article number 0 275 007 007 – standard battery pack, power output black 0 275 007 500 0 275 007 503 –...

  • Page 11: Operating Instructions

    E-Series Owner’s Manual Supplement - 129184.PDF oPeratInG InstrUCtIons Checking the Battery Pack Before Using for Charge-control Indicator the first time When the battery pack is switched on, the five green lEDs of the charge-control indicator 21 indicate the charge condition Check the battery pack before charging it or using it with your of the battery pack.

  • Page 12: Storage Conditions

    switching on and off notes for optimum handling of the Battery Pack switching the battery pack on is one of the possibilities to start the eBike system. Read and observe the operating The battery-pack life can be prolonged when being properly in-structions of the drive unit and the drive HMI.

  • Page 13: Initial Operation

    E-Series Owner’s Manual Supplement - 129184.PDF Initial operation options for switching off the eBike system: ■ press the on/off button 5 of the drive HMI. requirements ■ switch the battery pack off by its on/off button (see The eBike system can only be activated when the following battery pack operating instructions.) requirements are met: ■ Remove the drive HMI out of its holder.
  • Page 14 setting the assistance level switching the drive hmI on/off To switch on the drive HMI, briefly press the on/off button 5. The level of assistance of the eBike drive when pedaling can be adjusted via the drive HMI. The assistance level can be When the internal battery pack is sufficiently charged, the drive HMI can also be switched on when not inserted in the holder.
  • Page 15 E-Series Owner’s Manual Supplement - 129184.PDF range estimate (at selected assistance level) PowerPack 300 PowerPack 400 “TURBO” “TURBO” “SPORT” “SPORT” “TOUR” “TOUR” “ECO” “ECO” Mix* Mix* 80 100 120 140 160 180 200 80 100 120 140 160 180 200 speed estimate (at selected assistance level) PowerPack 300 PowerPack 400...
  • Page 16 switching the Push-assistance mode on/ speed and distance Indication The speed indication e always displays the current speed. The push-assistance feature makes it easier to push the eBike. The following functions are available in the function indica- The speed in this function depends on the set gear and cannot tion (combination of text indication c and value indication d): exceed 6 km/h (max.).
  • Page 17 E-Series Owner’s Manual Supplement - 129184.PDF displaying/adapting Basic settings notes on riding with the eBike system The basic settings can be displayed and changed no matter if When does the eBike drive operate? the drive HMI is in the holder 4 or not. The eBike drive supports you when riding, as long as you To access the basic settings menu, press and hold the “REsET”...
  • Page 18 Continued travel without assistance from the drive is possible at any time. However, have the eBike checked before attempting new trips. have all inspections and repairs carried out only by an authorized Cannondale dealer. When an error is ■...
  • Page 19 E-Series Owner’s Manual Supplement - 129184.PDF factors affecting assistance range 1. Battery Charge level - a fully charged battery will provided the greatest range. Before every ride, make sure the battery is fully charged. 2. assitance mode & support level - The assistance mode and support level you select during the ride will affect the operating range.

  • Page 20: Headshok Suspension Fork

    E-series bicycle are equipped with a Cannondale Headshok Fatty suspension fork. The fork features the Dl50 damping cartridge. The internal spring size can be changed to accomodate various rider weights to tune performance. This fork is designed for a 700c wheel. The brake mounts are international standard. The fork features several accessory mounting points as shown in the figure, next page.
  • Page 21 E-Series Owner’s Manual Supplement - 129184.PDF KF258/ 6 Nm Loctite 242 HD169/ QHDST/EBO KF241/ KF239/XL HD191/BLK KF242/ KF243/ 17-18 Nm Loctite 242 HD170/ KP285/ = 110mm 6 Nm 6 Nm Loctite 242 Loctite 242 figure 13. 1. Headtube 9. Upper Boot Clamp (49mm) 17.

  • Page 22: Maintenance

    Be Performed By Cannondale dealer : recommended after the first 150 km, bring your bike to your Cannondale Dealer for an initial check- up. It should include checks of the drive assist system, drive chain condition, proper shifting, accessories, wheels and tire condition, brakes, etc.

  • Page 23: Tightening Torques

    E-Series Owner’s Manual Supplement - 129184.PDF Cleaning When cleaning your bike, use a damp sponge or a soft brush with only a mild soap and water solution. Rinse the sponge often. Do not spray water. notICe Do not use a pressure washer or dry with compressed air. This will force contaminants into sealed areas, electrical connections/components promoting corrosion, immediately damaging, or result in accelerated wear.

  • Page 24: Geometry

    Fork rake stack Reach Frame aluminium 6061-T6 Headtube onepointFive, Cannondale Headshok Fork Headshok Fatty Dl50, Fatty Rigid Drive Chain 9-speed, 114 links / 10 speed 114 links Chainring / Rear Cassette 42T 4-Bolt 104 BCD / 11-32, 9 speed 11-32, 10 speed seat post 27.2mm dia.

  • Page 25: Keys

    E-Series Owner’s Manual Supplement - 129184.PDF keys Your E-series bike comes with a main key (1) and spare key (2). The keys are identified by the serial number (3). The keys work in both the rear wheel frame lock and the BosCH battery lock. please record the key serial number for future use and key replacement.

  • Page 26: Replacement Parts

    Parts The following replacement part kits are available through a Cannondale Dealer: e-series Code desCrIPtIon 2Ks00/BlK KICKsTaND sI Kp192/ KIT, CHaINRING,Fsa E-BIKE WB156 42T Kp259/ KIT CHaINGUaRD E-sERIEs BlK Kp260/ KIT CHaINGUaRD E-sERIEs WHT Kp261/BlK KIT FENDER E BIKE FRoNT BlK...
  • Page 27 WARNING! READ THIS SUPPLEMENT AND YOUR CANNONDALE BICYCLE OWNER’S MANUAL. BOTH CONTAIN IMPORTANT SAFETY INFORMATION. KEEP BOTH FOR FUTURE REFERENCE. CANNONDALE USA CANNONDALE EUROPE CANNONDALE UK Cycling Sports Group, Inc. Cycling Sports Group Europe, B.V. Cycling Sports Group 172 Friendship Road,...

Table of Contents

Save PDF