Summary of Contents for Cannondale 2016 SUPERSIX EVO
Page 1
WARNING READ THIS SUPPLEMENT AND YOUR CANNONDALE BICYCLE OWNER’S MANUAL. Both contain important safety information. Keep both for future reference.
If you need a manual or supplement, or have a YOUR CANNONDALE question about your bike, please contact your Cannondale Dealer immediately, or call us at one of DEALER the telephone numbers listed on the inside cover of this supplement.
Inspect frame carefully for damage (See PART II, All riders must understand a fundamental reality Section D. Inspect For Safety in your Cannondale of composites. Composite materials constructed Bicycle Owner’s Manual. ) of carbon fibers are strong and light, but when...
133349PDF REPAINTING OR TIGHTENING TORQUES REFINISHING Correct tightening torque for the fasteners (bolts, screws, nuts) on your bicycle is very important to your safety. Correct tightening torque for the WARNING fasteners is also important for the durability and performance of your bicycle. We urge you to have your Dealer correctly torque all fasteners using a Repainting, painting over, retouching, or torque wrench.
If you ride a trainer a lot, consider using an old you notice damage to the threaded insert, please bike: Corrosion from sweat will take it’s toll. ask your Cannondale Dealer for help. Weight is irrelevant. Save wear on your expensive components.
The serial number locatded on the bottom bracket. It is a 7-character barcode. Use this serial number to registration your bike. See your Cannondale Bicycle Owner’s Manual for more information on warranty registration. Other codes on the BB shell are related to production including model year , frame type, frame size, and color coding.
Page 8
SEAT POST Seat Binder 5 N-m, 44 In-Lbs Use a high-quality carbon gel to install and maintain the seat post. Cannondale kit KF115/ is a small KP397/ quantity, enough for two or three applications. 28.6 mm KF115/ Clean the inside of the seat tube. Wipe it out with a dry clean towel.
Page 9
BOTTOM BRACKET - PRESSFIT BB30A PF30 BB 1. Bottom bracket shell 6. 0.5mm shim(s) d. Pressfit bearing shield 2. Pressfit 30 bearing unit(2) 7. Wave washer e. Cup flange 3. Park tool HHP-2 a. Pressfit surface f. BB shell edge 4.
Page 10
BB shell edge. NOTICE Consult with your Cannondale Dealer on the quality and compatibilty of any proposed replacement component. Make sure the PressFit 30 system is intended for use with with a 46 mm I.D. BB shell. Confirm acutal part dimensions with a micrometer.
Page 11
REAR BRAKE ROUTING Rear brake cable routing is internal. The rear brake cable enters the top tube via the KP224/ cable guide KP224/. FRAME OPENING SIZE: 48, 50 FRAME OPENING Smaller size frames utilize a top tube opening SIZE: 48, 50 for the rear brake cable exit.
Page 12
CLEAR FILM limited protection against frame or finish damage caused by the chain. Replacements are available through a Cannondale Dealer. BB CABLE GUIDE The BB cable guide snaps into the shell hole with a guide tube that passes through the shell.
Need help?
Do you have a question about the 2016 SUPERSIX EVO and is the answer not in the manual?
Questions and answers