Components (Fig. 1); Intended Use; Assembly And Adjustments - DeWalt D28065 Instruction Manual

COMPONENTS (Fig. 1)

WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Trigger Switch
B. Lock On Button
(D28065, D28115 only)
C. Spindle Lock Button
D. Type 27 Guard
E. Dust Ejection System™
(DES)
F. Yellow Rubber Ring
G1. 1-11/16" (43 mm) diameter
quick-change backing flange

INTENDED USE

The D28065, D26065N, D28066N, D28115, D28115N heavy-duty
angle grinders have been designed for professional grinding at
various work sites (i.e., construction sites). DO NOT use under wet
conditions or in presence of flammable liquids or gases.
These heavy-duty angle grinders are professional power tools. DO
NOT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of injury, turn unit off
and disconnect it from power source before installing and
removing accessories, before adjusting or when making
repairs. Before reconnecting the tool, depress and release the
trigger switch to ensure that the tool is off. An accidental start-
up can cause injury.
G2. 3" (76 mm) diameter
stamped steel backing
flange (D28065, D28066N,
D28065N only)
H. Threaded Clamp Nut
I. Anti-Vibration Side Handle
(not shown)
J. Lock Off Button
(D28066N, only)
FIG. 1
C
D
F
8
B
J
A
E
E
H
G1
G2