English - Kenwood BL430 series Manual

Use your blender for soups, sauces,
drinks, pâtés, mayonnaise, dressings
etc. Use your mill (if supplied) for
milling herbs, nuts and coffee beans.
safety
●
Liquids should be allowed to cool to
room temperature before blending.
●
Switch off and unplug:
● ● before fitting or removing parts
● ● after use
before cleaning.
● ●
●
Keep hands and utensils out of the
blender when it's on the power unit.
●
Don't touch the sharp blades.
●
Never use a damaged machine. Get
it checked or repaired: see 'service
and customer care'.
●
Never use an unauthorised
attachment.
●
Never leave the machine on
unattended.
●
When removing the blender or mill
from the power unit:
● ● wait until the blades have
completely stopped;
● ● don't accidentally unscrew the jug
or jar from the blade unit.
●
Smoothie recipes - never blend
frozen ingredients that have formed
a solid mass during freezing, break it
up before adding to the goblet.
●
Misuse of your blender can result in
injury.
●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
●
Children should be supervised to
ensure that they do not play with the
appliance.

English

Please unfold the front page illustrations
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
1 Remove all packaging.
2 Wash the parts: see 'cleaning'.
key
blender
filler cap
lid
jug
sealing ring
blade unit
pulse control
speed control
power unit
cord storage
mill (if supplied)
blade unit
sealing ring
jar
sprinkler lid
to use your blender
1 Fit the sealing ring into the blade
unit.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Put the filler cap in the lid, then turn.
5 Screw the lid onto the jug so that the
thumb tab is over the handle. (To
unscrew the lid, push the thumb tab
.)
6 Place the blender onto the power
unit and turn to lock
2
.