Kenwood BL430 series User Manual

Use your blender for soups, Important – UK only
G
sauces, drinks, pâtés, mayonnaise, The wires in the cord are coloured
dressings etc. Use your mill (if as follows:
supplied) for milling herbs, nuts Blue = Neutral, Brown = Live.
G
and coffee beans. The appliance must be protected
by a 3A approved (BS1362) fuse.
safety
Note:
G
CAUTION: Blending very hot
G
For non-rewireable plugs the fuse
liquids may result in hot
cover MUST be refitted when
liquid and steam being
replacing the fuse. If the fuse cover
forced suddenly past the lid
is lost then the plug must not be
or filler cap. Allow the liquid
used until a replacement can be
to cool or reduce the
obtained. The correct fuse cover is
quantity and select a lower
identified by colour and a
speed if available. Protect
replacement may be obtained from
your hands with a cloth or
your Kenwood Authorised Repairer
oven gloves when handling
(see Service).
the hot goblet and lid.
G
If a non-rewireable plug is cut off it
G
Switch off and unplug:
must be DESTROYED
G G before fitting or removing parts
IMMEDIATELY. An electric shock
G G after use
hazard may arise if an unwanted
G G before cleaning.
non-rewireable pug is inadvertently
G
Keep hands and utensils out of the
inserted into a 13A socket outlet.
blender when it's on the power
G
This machine complies with
unit.
European Economic Community
G
Don't touch the sharp blades.
Directive 89/336/EEC.
G
Don't let children or infirm people
use the machine unsupervised. before using for the first
G time
Never use a damaged machine.
Get it checked or repaired: see 1 Remove all packaging.
'service'. 2 Wash the parts: see 'cleaning'.
G
Never use an unauthorised
key
attachment.
G
Never leave the machine on
blender
unattended.
filler cap
G
Don't let children play with the
lid
machine.
jug
G
When removing the blender or mill
sealing ring
from the power unit:
blade unit
G G wait until the blades have
pulse control
completely stopped;
speed control
don't accidentally unscrew the
G G
power unit
jug or jar from the blade unit.
cord storage
G
Only use the machine for its
mill (if supplied)
intended domestic use.
blade unit
sealing ring
before plugging in
jar
Make sure your electricity supply is
sprinkler lid
the same as the one shown on the
underside of the machine.
G
to use your blender Don't use the blender as a storage
container. Keep it empty before
1 Fit the sealing ring into the blade
and after use.
unit. G
Never blend more than 1
2 Screw the jug onto the blade unit.
(2 pts 12 fl.oz) – less for frothy
3 Put your ingredients into the jug.
liquids like milk shakes.
4 Put the filler cap in the lid, then
mill only
turn.
Use for dry ingredients only.
5 Screw the lid onto the jug so that
the thumb tab is over the handle.
hints
(To unscrew the lid, push the
G
When making mayonnaise, put all
thumb tab .)
the ingredients, except the oil, into
6 Place the blender onto the power
the blender. Then, with the
unit and turn to lock .
machine running, pour the oil into
7 Select a speed.
the filler cap and let it run through.
G
Use speed 1 for lighter blending
G
Thick mixtures, eg pâtés and dips,
eg. batters, milkshakes and
may need scraping down. If it's
scrambled eggs.
difficult to process, add more
G
Use speed 2 for soups, sauces,
liquid.
pâtés and mayonnaise.
G
When crushing ice, add 15ml
OR
(1 tbsp) water to 6 ice cubes.
G
Use the pulse control to operate
Operate the blender in short
the motor in a start/stop action.
bursts.
The pulse control operates the
motor and keeps it running for as to use your mill
long as the lever is held down -
1 Put your ingredients into the jar. Fill
this will allow you to control the
it no more than half full.
texture of various foods eg. pâtés.
2 Fit the sealing ring into the blade
Important
unit.
blender and mill
3 Turn the blade unit upside down.
G
To ensure long life of your blender,
Lower it into the jar, blades down.
never run it for longer than 60
4 Screw the blade unit onto the jar
seconds or the mill for longer than
until it's finger-tight.
30. Switch off as soon as you've
5 Place the mill onto the power unit
got the right consistency.
and turn to lock.
G
Don't process spices – they may
6 Select a speed or use the pulse
damage the plastic.
control.
G
The machine won't work if the
7 After milling, you can replace the
blender or mill is fitted incorrectly.
blade unit with the sprinkler lid and
shake out your food.
blender only
G
The sprinkler lid is not airtight.
G
Don't put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces;
remove the filler cap; then, with the
machine running, drop them
through one by one. Keep your
hand over the opening. Empty
regularly.
1 ⁄ litres
2