Technical Data; Declaration Of Conformity - DeWalt de7400 Instruction Manual

HEAVY-DUTY ROLLING TABLE SAW STAND
DE7400
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Length
Height
Maximum working load
Weight
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.

Declaration of Conformity

DE7400
D WALT declares that this product described under
E
"technical data" have been designed in compliance
with applicable technical rules.
For more information, please contact D
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D
E
DE7400
mm 910
mm 830
Horst Grossmann
kg 68
Vice President Engineering and Product
kg 15.5
Development
D
E
D-65510, Idstein, Germany
04.08.08
General Safety Instructions for Table
Saw Accessories
WALT.
WALT, Richard-Klinger-Straße 11,
WARNING: For your own safety, read
the table saw instruction manual before
using any accessory. Failure to heed
these warnings may result in personal
injury and serious damage to the table
saw and the accessory. When servicing
this tool, use only identical replacement
parts.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING: To reduce the risk of
personal injury:
• Ensure all stand fasteners are
securely fastened and that all stand
mechanisms are in proper working
order before operating the table saw.
• DO NOT exceed the weight this
stand can hold. The DE7400 table
saw stand is designed to support
68 kgs. (150 lbs.) safely in a work
environment. It is unsafe to climb, sit
or stand on the stand.
• Follow the mounting instructions
carefully. Fasten the tool to the
saw mounting brackets securely as
instructed.
• DO NOT modify or use stand for
operations for which it is unintended.
EN GL IS H
WALT at the
E
15