Miele KM 6304 Operating And Installation Instructions page 51

Problem
The sensors are
over-sensitive or do
not react at all.
FE flashes alternately
with numbers in the
timer display.
FE 44
FE 47
FE 48
Other fault messages
FE..
Possible cause
The sensitivity level of
the sensors has
changed.
The overheating
protection
mechanism has
triggered.
The fan is either
blocked or faulty.
There is an electronic
fault.
Problem solving guide
Remedy
Make sure that there is no direct
light (from the sun or from an
artificial source) falling onto the
cooktop and that the
surrounding area is not too dark.
Make sure that there is nothing
covering the sensors or the
cooktop. Take any pans off the
cooktop and wipe away any
food deposits.
Interrupt the power supply to the
cooktop for approx. 1 minute.
If this does not solve the
problem, please call Miele.
See "Overheating protection".
Make sure it has not been
blocked by something like a
fork. Remove the cause of the
blockage. If the fault message
appears again, call Miele.
Interrupt the power supply to the
cooktop for approx. 1 minute.
If the problem persists after
reconnecting the appliance to
the power supply, please
contact Miele.
51