Setting An Ip Address On Your Pc - Panasonic BL-C10A Operating Instructions Manual

3.6

Setting an IP Address on Your PC

Your PC's IP address can be assigned by the following procedures.
1.
Display the TCP/IP Properties window.
• The steps are different depending on your OS. The steps are shown
below.
OS
Windows 98SE,
Windows Me
Windows 2000
Windows XP
• When using Windows 2000 and Windows XP, log in as an administrator to
access the TCP/IP Properties window.
2.
Enter IP address and subnet mask.
3.
Click [OK].
• In Windows 98SE or Windows Me, the PC needs to be restarted to enable
the settings.
Private IP Address
Private IP address is the network ID that is not used on the Internet. They are
classified into Class A, Class B and Class C, as shown below. Set the IP address
in the range of the number specified in the class corresponding to your local
network scale.
Class
Class A
Class B
Class C
[Start] [Settings]
[TCP/IP] with adaptor in use
[Specify an IP address]
[Start] [Settings]
Connections]
[Properties]
[Properties]
[Start] ( [Settings])
Internet Connections]
Connection] in use
[TCP/IP] [Properties]
Subnet Mask
255. 0. 0. 0
255. 255. 0. 0
255. 255. 255. 0
[For assistance, please call: 1-800-272-7033]
Steps
[Control Panel]
[Properties]
[Control Panel]
[Local Area Connection] in use
Select Internet Protocol [TCP/IP]
[Use the following IP address]
[Control Panel]
[Network Connections]
[Properties]
[Use the following IP address]
Private IP Address
10. 0. 0. 1
172. 16. 0. 1
192. 168. 0. 1
Operating Instructions
[Network] Select
[IP Address]
[Network and Dial-up
[Network and
[Local Area
Select Internet Protocol
— 10. 255. 255. 254
— 172. 31. 255. 254
— 192. 168. 0. 254
89