Using Operation Bar - Panasonic BL-C10A Operating Instructions Manual

Operating Instructions
1.2.3

Using Operation Bar

Note
When the camera image is not displayed correctly, click [Refresh] at the tool
bar on the web browser. The image will be refreshed.
14
End Display When the pan/tilt has reached the end (Left
and Preset End, Right End, Up End and Down End), End
Display: Display appears. When clicking a preset button,
the preset name appears.
Pan/Tilt
Moves the lens throughout the horizontal (
Scan:
or vertical (
position.
Pan/Tilt/ Controls lens direction.
Home
Pan (
Position:
: Down) and Home Position (
Preset Applies the camera direction to a preset
Button: position. You can preset 8 positions (see page
16—page 19).
Sensor When the sensor detects a temperature
Position: difference, the camera can be set up to turn to
this position. Only an administrator can operate
it (see page 16).
Brightness: Changes brightness in nine steps including
[STD] (Standard). Clicking [-] or [+] changes the
image brightness.
Refresh Sets a refresh interval. (Motion—60-second
Interval: interval)
Resolution: Selects [640 x 480] or [320 x 240] (default)
pixels.
Image Selects the image quality.
Quality:
•
•
•
) range, and returns to the original
: Left, : Right), Tilt (
[Favor Clarity] optimizes the image for good
clarity.
[Standard] keeps the standard quality.
(default)
[Favor Motion] optimizes the image for
motion display.
)
: Up,
: Center)