Download Print this page

Pioneer MEH-P7350 Installation Manual page 4

Hide thumbs Also See for MEH-P7350:

Advertisement

1. Refer to a Handsfree Telephone Unit's
manual (sold separately).
16.
Front output
2. MIC terminal
16 cm
16 cm
16 cm
3. TEL terminal
17.
Fuse
5. Subwoofer output
4. Multi-CD player
or Non Fading output
(sold separately)
18.
This Product
6. Antenna jack
7. IP-Bus input (Blue)
19.
Blue/white
To system control terminal o
8. IP-BUS cable
or Auto-antenna relay contro
(max. 300 mA 12 V DC).
9.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
10.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
11.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
12.
Orange/white
To lightnig switch terminal.
13.
Black (ground)
To vehicle (metal) body.
14.
With a 2 speaker system, do not connect anything to
the speaker leads that are not connected to speakers.
15.
Use this for connections when you have the separately
available amplifier.
20.
Connecting cords
with RCA pin plugs
(sold separately)
21. Power amp
(sold separately)
of the power amp
ol terminal
22.
System remote control
+
+
23.
Front speaker
23.
Front spe
eaker
24.
White
25.
Gray
+
+
23.
Front spe
eaker
Front speaker
23.
26.
White/black
27.
Gray/black
28. Le
eft
29. Right
30.
Green
31.
Violet
+
+
32.
Rear spe
aker
32.
Rear speaker
33.
Green/black
34.
Violet/black
+
+
35.
Subwo
oofer
35.
Subwoofer
1. Refer to a Handsfree Telephone Unit's
manual (sold separately).
2. MIC terminal
21. Power amp
(sold separately)
3. TEL terminal
5. Subwoofer output
4. Multi-CD player
or Non Fading output
(sold separately)
6. Antenna jack
9.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
10.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
11.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
12.
Orange/white
To lightnig switch terminal.
13.
Black (ground)
To vehicle (metal) body.
Fig. 11
±± qJAë
16.
Front output
16 cm
16 cm
16 cm
17.
Fuse
18.
This Pr
roduct
7. IP-Bus input (Blue)
19.
Bl
lue/white
To
o system control terminal of the power amp
8. IP-BUS cable
or
r Auto-antenna relay control terminal
(m
max. 300 mA 12 V DC).
+
23.
Front speaker
28. Left
+
35.
Subwoofer
24.
White
25.
Gray
+
23.
Front speaker
26.
White/black
27.
Gray/black
29. Right
30.
Green
31.
Violet
+
35.
Subwoofer
33.
Green/black
34.
Violet/black
36.
Note:
Change the Initial Setting of this Product (refer to the
Operation Manual). The subwoofer output of this unit is
monaural.
Fig. 12
±≤ qJAë

Advertisement

loading