Table of Contents
Advertisement
Driver Installation
The following is the steps of installation USB driver.
System Requirement
CPU: IBM, Pentium III or above, or other compatible PC.
•
Memory: above 32 MB
•
System: Windows XP SP2 and above (32 & 64 bit)
•
Windows Vista (32 & 64 bit)
Windows 7 (32 & 64 bit)
Note: the driver is not support Windows 8.
Installation
I.
Starts the driver installer from HOLUX website.
II. Connect USB data cable to computer. System will search new hardware and install the driver
automatically.
III. Connect RCV-3000 GPS Logger with USB data cable.
Important
Verify the COM port to start using your own navigation software.
I.
Click <Start> menu, select → <Setting>, then enter→ <Controller>
II. After entering <Controller>, and select <System>.
III. Select <Device Manager>.
IV. Find the < Connector (COM & LPT)> and check the Virtual COM Port, which was created by
the USB driver.
Please note that the virtual COM port number might be different from every computer. Before using
navigation software, please confirm the COM Port numbers created by your computer and provided
by your navigation software. Otherwise, the navigating software won't receive the satellite signal,
because of the un-match COM Port setting.
18
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RCV-3000 and is the answer not in the manual?
Questions and answers