Creating Driver Disks; Required Driver Disks - Fujitsu Primergy RX100 S3 User Manual

Chapter 4 Manual OS Installation

4.1 Creating Driver Disks

When installing the OS manually, it is necessary to create driver installation disks
beforehand. Also, driver disks must be created when you add an expansion card
during server operation.

4.1.1 Required Driver Disks

Prepare for the floppy disks in advance to create the driver disks. A floppy disk is necessary for each
driver.
The driver disks to be created differ depending on the OS to be installed.
Standard driver provided with the OS is installed automatically at the OS installation.
You need a Server Start Disc 1 CD-ROM to install the driver provided with the Server Start CD-ROM.
Prepare for it in advance.
■ For Windows Server 2003 x64
Expansion card / onboard controller
Chipset
Graphic controller
Onboard SCSI controller
Onboard LAN
LAN card (PG-1852 / PG-1862 / PG-1882L /
PG-1892L)
SCSI Ctrl U160 lp (PG-1301L)
GEM318 driver
Other expansion cards
*1: Created by the ServerStart FloppyBuilder function
110
table: Drivers Required for Installing Windows Server 2003 x64
Driver provided with the Server Start CD-ROM
Standard driver provided with the OS
Standard driver provided with the OS
RX100 S3 Onboard LAN Driver Windows 2003 Drivers Disk
Ver8.39.1.0
PG-185x/186x/188x/189x LAN Driver Windows 2003 for x64
Edition Drivers Disk Ver10.1
Standard driver provided with the OS
Driver provided with the Server Start CD-ROM
Driver supplied with the expansion card
Driver
*1
*1