2.13 [6] Feature
Feature Manual References
1.11.4 Music on Hold
1.17.3 Tenant Service
Operator (Extension Number)
Specifies the extension number or the floating extension number of an incoming call distribution group
to be designated as the tenant operator. When this parameter is left unspecified, the PBX operator
serves as the tenant operator.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.13.6 [6-6] Tenant
Programming Manual References
2.9.3 [2-2] Operator & BGM
Feature Manual References
1.12.5 Operator Features
1.17.3 Tenant Service
ARS Mode
Specifies the ARS mode used when making a CO line call.
Default
Same as System Setting
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using any Idle
Line Access method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using any CO
Line Access method.
Same as System Setting: The setting specified in ARS Mode in 2.15.1 [8-1] System Setting is
applied.
Maintenance Console Location
2.13.6 [6-6] Tenant
Programming Manual References
2.15.1 [8-1] System Setting
608
PC Programming Manual