Panasonic KX-TDA50 Pc Programming Manual page 193

Value Range
Slot number
Maintenance Console Location
2.8.24 [1-1] Slot—Port Property - IP-Extension Port
Programming Manual References
None
Feature Manual References
1.9.15 IP-PT (IP Proprietary Telephone)
Port
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
2.8.24 [1-1] Slot—Port Property - IP-Extension Port
Programming Manual References
None
Feature Manual References
1.9.15 IP-PT (IP Proprietary Telephone)
Extension Number
Specifies the extension number of the port.
To change the extension number of an extension, follow the steps below:
1.
Type the new extension number, then click Apply.
2.
Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.
Default
For KX-TDA100/KX-TDA200:
Starting at 101
For KX-TDA600:
Starting at 1001
(For port 01 of the first extension card that is installed. Extension numbers are preset for subsequent
extensions by adding one to the previous extension number.)
2.8 [1] Configuration
PC Programming Manual 193