Assembly And Usage Of Seat Unit - Emmaljunga Super Viking Instruction Manual

Assembly and usage of seat unit

Removing and assembling the seat-fabrics
1
• The fabrics of the pram are assembled at delivery, but can be remo-
1
ved to be washed.
• Before washing, remove the wooden seat plate which you will find
within the seat unit fabrics. Open with the aid of the zipper (1).
IMPORTANT
• Follow the washing instructions in this instruction manual's section
for care and maintenance.
• To assemble the seat unit fabrics, open all of the zippers on the
3
2 seat-fabrics. Insert the wooden seat plate. Insert the seat unit's
aluminium frame into the fabric as shown in the picture (2).
2
• The black plastic strap on the seat unit frame (3) should be placed
on the outside of the fabric.
• Place the shoulder harness straps through the holes – (4) or (5) de-
3
pending on the size of the child – in the backrest of the seat fabric.
5
• Put the shoulder harness protection pads back on the harness.
4
4
• Place the crutch strap through the holes – (6) or (7) in the seat
fabric and the wooden seat plate.
6
7
• Secure the black plastic strap to the seat fabric with the aid of the
5
two Velcro straps on the fabrics.
52
Assembly and usage of seat unit
6
10
7
8
9
10
Super Viking v. 2.5 Super Viking v. 2.5
• Check that all zips are attached, (five in total):
− For the wooden plate
− 1 pc under the seat (8)
8
− 1 pc under the footrest (9)
11
− 1 on each side of the seat along the black plastic Easy fix attach-
ment points (10 and 11).
9
WARNING
• Before you use the pram, make sure that the seat fabrics are
correctly attached and that all 5 zippers are correctly
fastened.
Assembly of the hood
• Affix both the hood clips on the side of the seat unit.
WARNING
• The hood should be assembled when the pram is in use.
Height adjustment of the hood
• The height of the hood can be adjusted by sliding the hood up and
down on the frame of the seat unit.
Removing the hood fabric
• Open the zipper and remove the fabric.
WARNING
• Shearing and Compression points
Note the following when assembling a hood fabric on the aluminium
hood frame. Make sure that the hood frame is assembled as
shown in pictures 9 and 10. Incorrect assembly as shown in picture
11 and 12 can cause shearing and compression points.
This is both for disassembling to wash and changing the hood
fabric.
13
53