Ssd Drive - HP EliteBook Folio 1040 G3 Maintenance And Service Manual

SSD drive

Description
Solid-state drive
512-GB, TLC
256-GB, SED, OPAL2, MLC
256-GB, PCIe, MLC
256-GB, TLC
240-GB, TLC
180-GB, MLC
180-GB, SED, OPAL2, MLC
128-GB, TLC
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
Remove the SSD:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the system board.
2. Remove the drive (2) by pulling it away from the connector.
NOTE:
Reverse this procedure to reassemble and install the SSD drive.
32 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
mSATA drives are designed with notches to prevent incorrect insertion.
28).
29).
Spare part number
848878-001
844406-001
844405-001
844408-001
844407-001
844403-001
844404-001
844402-001