Accepting A Call; Caller Id - Siemens Gigaset S675 IP Manual

Making calls with VoIP and the fixed line network

Accepting a call

The handset indicates an incoming call in three ways: by ringing, by a display
on the screen and by the flashing Speaker key d.
Please note
Only calls to receive numbers assigned to your handset are signaled
£
( Page
u
If a phone number is assigned to neither a handset nor the answering
machine as a receive number, calls to this number are signaled on all hand-
sets.
u
If the phone number is not assigned to a handset but is assigned to the
answering machine, the call will not be signaled on any handset and the
answering machine accepts the call.
u
If you have not assigned receive numbers to any of the registered handsets
or the answering machine, calls to all connections are signaled on all hand-
sets.
u
Calls to your IP address are signaled on all handsets.
You can accept the call by:
¤
Pressing the Talk key c.
¤
Pressing the Speaker key d.
¤
Pressing the Display key
machine (
If the handset is in the charging cradle and the
£
( Page
the cradle.
If the ringer is intrusive, press the Display key
long as it is displayed on the screen.
Please note
You can reject VoIP calls by pressing the End Call key
an appropriate message (provider-dependent).
In the case of fixed line network calls, pressing the End Call key deactivates the
ringer (like

Caller ID

When you receive a call from the Internet, the caller's number or the name they
have specified is displayed on the screen.
When you receive a call from the fixed line network, the caller's number and/or
name is displayed on the screen if you have requested CID from your network
provider.
If the phone number is identified and the caller's number is saved in your hand-
set's local directory, the name is displayed from the directory. A CID image
assigned to the name will also appear in the display.
50
169). The following conditions apply in particular:
Ÿ
£
Page 102).
127), the handset will take a call automatically when you lift it out of
).
§Silence§
to forward the call to the answering
Auto Answer
. You can accept the call as
§Silence§
a
function is activated
. The caller receives