Reverting To Idle Status; Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock; Using This Guide - Siemens Gigaset S675 IP Manual

Operating the handset

Reverting to idle status

You can revert to idle status from anywhere in the menu as follows:
¤
Press and hold the End Call key a.
Or:
¤
Do not press any key: after 2 minutes the display will automatically revert
to idle status.
Changes that you have not confirmed or saved by pressing
or
Save Entry
An example of the display in idle status is shown on

Activating/deactivating the handset

a
Press and hold the End Call key again to reactivate the handset.

Activating/deactivating the keypad lock

The keypad lock prevents any inadvertent use of the phone.
#
When the keypad lock is activated, you will see the icon Ø on the display.
The keypad lock is deactivated automatically during an incoming call, and is
then reactivated.
Please note
If you inadvertently press a key while the keypad lock is activated, an advisory
message appears on the display. To deactivate the keypad lock, press and hold
the Pound key (#).

Using this guide

The operating steps are shown in abbreviated form in the user guide.
Example of "Activating/deactivating auto answer":
The display
¢
v Ð
38
are lost.
§OK§
With the phone in idle status, press and hold the End Call key to
deactivate the handset. You will hear the confirmation tone.
Press and hold the Pound key (#). You will hear the confirmation
tone.
¢ ¢
Handset Auto Answer
Page
‰
( = on)
, , ,
§OK§ §Yes§ §Save§ §Send§
1.