Touch Screen Surface; Touch Screen Protection Film - ABB PP885 Hardware And Installation Manual

Touch Screen and Overlay Material
Autoflex EBA 180L is not resistant to high pressure steam at over 100 °C or the
following chemicals:
Concentrated mineral acids
Concentrated caustic solution

Touch Screen Surface

The touch screen surface on the operator panel withstands exposure to the following
solvents without visible change:
Solvents
Acetone
Isopropanol
Toluene

Touch Screen Protection Film

Autoflex EBA 180L
It is recommended to use the Autoflex EBA 180L protection film, RX885/893,
that can be ordered from ABB.
Solvent Resistance
The chemical resistance for Autoflex EBA 180L is described in section
Autoflex EBA
Outdoor Use
In common with all polyester based films, Autoflex EBA 180L is not suitable for use
in conditions of long-term exposure to direct sunlight.
The layer structure of the touch screen contains air and in rare cases appearance
of bubbles can arise. This is purely cosmetic and does not affect any functionality
of the panel. The appearance can occur under certain environmental conditions
such as temperature, humidity, and atmospheric pressure.
26
180L.
Section 5 Chemical Resistance
Benzyl alcohol
Methylene chloride
Time
10 minutes
10 minutes
5 hours
3BSE069463-600 Rev C