Lines Are Misaligned - Canon MG2500 Series Troubleshooting Manual
Hide thumbs
Also See for MG2500 Series:
- Online manual (176 pages) ,
- Getting started (2 pages) ,
- Quick start manual (34 pages)
Table of Contents
Advertisement
Lines Are Misaligned
Did you confirm the paper and print quality settings?
Check1
Print Results Not Satisfactory
Perform Print Head Alignment.
Check2
If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position.
Aligning the Print Head
Note
• If the problem is not resolved after performing the Print Head Alignment, perform Print Head Alignment
manually referring to Aligning the Print Head Position from Your Computer.
Increase the print quality and try printing again.
Check3
Increasing the print quality in the printer driver may improve the print result.
20
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MG2500 Series and is the answer not in the manual?
Questions and answers
THE GREENLIGHT IS ON, THERE IS A YELLOW LIGHT FLASHING. IT WILL NOT PRINT
green light on, flashing yellow, error ink not installed correctly. cannot move carriage to center to reinstall
To fix the flashing yellow light and the error message for ink not installed correctly on a Canon MG2500 Series printer, follow these steps:
1. Open the ink cartridge chamber door.
2. Check if the ink cartridges are properly installed.
3. If not, press down and remove the cartridges.
4. Reinsert them by sliding them in and pushing them firmly until they are parallel to the ground.
5. Close the ink cartridge chamber door.
6. Wait for the printer to recognize the cartridges.
7. If the lights stop flashing and the green light becomes stable, the issue is resolved.
If the error persists, check for any additional error codes related to ink recognition and follow the appropriate troubleshooting steps.
This answer is automatically generated
I'm getting an error message that the waste ink waste absorber pad is full and it won't print. Can this be replaced on a MG2522 printer and if so, how? I'm not finding anything that looks like a pad nor how it would be accessed. Thanks.
The green power button & the yellow triangle button flashing back & forth. The ink cartridge containers will not move to the middle so I can install new cartridges.
When the green power button and yellow triangle button are flashing on a Canon MG2500 Series printer, it indicates an error. One common issue is with the ink cartridges not being installed properly.
To resolve the issue:
1. Open the ink cartridge chamber door.
2. Check if the ink cartridges are properly seated.
3. If not, press them down, remove them, and reinstall them.
4. Ensure the cartridges are securely in place by sliding them in and pushing them until they click.
5. Close the chamber door and check if the flashing lights stop.
If the ink cartridge containers are not moving:
- Ensure there is no protective material or tape blocking the cartridge holder.
- Check for any paper jams or obstructions.
- Restart the printer and try again.
If the issue persists, additional troubleshooting or contacting Canon support may be necessary.
This answer is automatically generated