Panasonic KX-TD500 System Reference Manual page 294

4. Call Forwarding and Station Hunting
4-2.
Caller
VPS 1
(continued)
FWD to a VPS extension
(All members of a hunting group are VPS extensions)
Transfer
Ext.1
FWD mode
(FWD-All/Busy)
Code Call State
Ringback Tone
C 1
(The call is forwarded to an idle VPS
extension and
Busy Tone * 2
C 2
(FWD-No Answer)
Code Call State
Ringback Tone
A 1
(The call is arriving at Ext.1)
↓
Call Forwarding No Answer Time
has been elapsed.
↓
Ringback Tone
C 1
(The call is forwarded to an idle VPS
extension and
Ringback Tone
A 1
(The call is arriving at Ext.1)
↓
Call Forwarding No Answer Time
has been elapsed.
↓
Ringback Tone *
C 2
* 1
This way, the VPS 1, typically an Automated-Attendant, can release the call
to an idle VPS extension and take another incoming call.
The "Forward to VM Sequence" of the Ext.1 is sent to an idle VPS extension.
*
2
This way, the VPS 1, typically an Automated-Attendant, knows it must give
the caller an opportunity to leave a message before releasing the call.
3-F-34
Hunting
Forward
VPS 2 Hunting Group
Hunting
At least one VPS
extension of a hunting
arriving on it.) * 1 group is idle.
All members of a hunting
group are busy.
At least one VPS
extension of a hunting
group is idle.
arriving on it.) * 1
All members of a
hunting group are busy.
2
VPS 5
Hunting
VPS 4
Hunting
VPS 3
Conditions
Conditions