Panasonic KX-TD500 System Reference Manual page 895

9.00 READ
Description
This function enables you to copy the desired
system programming data from specified screen
into the currently displayed screen quickly.
This is available in the screens where READ is
displayed in the function field.
Operation
<Example>
Copying the system programming data of "Class
of Service (COS) No.=01" into "COS No.=32".
The current screen is Class of Service (COS)
No.=32.
System-Class of Service
Class of Service (COS) No. = 32 (1/3)
1 COMMON 2 INDEX 3 COPY 4 READ
F4
1. Press F4.
READ>COS No. (01-32)=
1 2 3 4
2. Enter the COS number 01 to copied.
READ>COS No. (01-32)=01
1 2 3 4
5 6 HRDCPY 7 8
5 6 7 EXIT 8
1
0
5 6 7 EXIT 8
3. Press the RETURN key. RETURN
System-Class of Service
Class of Service (COS) No. = 32 (1/3)
READ>COS No. (01-32)=01
* * * * * OK
1 2 3
• The message below appears when the
stored data of COS No.=01 is copied
properly to COS No.=32.
* * * * * OK
Conditions
To repeat "READ" operation, repeat from step 2.
When READ operation is unsuccessful, one of
the following error messages appears on the
screen:
Error message types depend on the situation.
***** Error : Illegal parameter
***** Error : Not installed
For details about the error messages, refer to
Section 10-K "Error Message Tables".
To store the copied data, press PF4 or PF2.
To conclude this mode, press the EXIT (F7) key.
Reference
The READ function is available in the screens
listed below. For the input values, refer to
Section 10 "System Programming (VT)".
• System-Class of Service (1/3) (2/3) (3/3)
• Group-Trunk Group (1/3) (2/3) (3/3)
• Trunk-CO Line
• Extension-Station (1/4) (2/4) (3/4) (4/4)
• Extension-DSS Console (1/3) (2/3) (3/3)
8-J-15
4 5 6 7 EXIT 8