Transmitting; Receiving; Reviewing Messages In The Stack Memory; Automatic Status Response - Kenwood TK-780 Instruction Manual

■

Transmitting

1 Select your desired system and group (or group and channel).
2 Press the A key to enter Selcall Mode.
3 Use the
you want to call.
• You can also enter digits by using the microphone keypad if Manual Dial is
enabled. (Press
4 Press the A or # key to enter Status Mode.
5 Use the
transmit.
• You can also enter digits by using the microphone keypad if Manual Dial is
enabled. (Press
6 Press the PTT switch to initiate the Status call.
• "COMPLETE" is displayed when the call has been successfully transmitted.
■

Receiving

The mail icon (
when a Status call is received.
• The display alternates between the caller ID and the message.
Press any key to return to Normal Operation Mode.
■

Reviewing Messages in the Stack Memory

1 Press and hold the A key for more than 1 second to enter Stack Mode.
• The last received message is displayed with the message number. "S" (Status)
appears with the number.
2 Use the
want to view (if more than one message is stored in the stack memory).
3 Press the p p p p p C or Do o o o o key to stop the message from auto-scrolling if
desired. Also use these keys to scroll through the message manually.
4 Press the SCN key to toggle between the message and the caller's ID.
5 To erase the message, press and hold the SCN key for more than
1 second.
■

Automatic Status Response

If you pre-select a status number and then leave the transceiver in Status
Mode, the transceiver will automatically respond with that status number
when a request from the base station is received. (The base station request
function is optional.)
16
/ keys (right side keys only) to select the ID of the station
to erase an incorrect digit.)
/ keys (right side keys only) to select the status you want to
to erase an incorrect digit.)
) will flash and a calling ID or text message will appear
/ keys (right side keys only) to select the message you