TRUNKED OPERATION
■
Placing a Dispatch Call
1 Select the desired system and group using the System and Group keys.
2 Press the PTT switch.
3 If a tone does not sound, communication is possible; start speaking into
the microphone. Release the PTT switch to receive.
• For best sound quality at the receiving station, hold the microphone
approximately 1.5 inches (3 ~ 4 cm) from your mouth.
4 When your conversation is finished, return the microphone to its hanger.
■
Receiving a Dispatch Call
1 Select the desired system and group using the System and Group keys.
(If the Scan function has been programmed, you can switch it ON or OFF
as desired.)
2 When you hear the dispatcher's voice, readjust the volume as necessary.
■
Placing a Telephone Call
Note: You can make a telephone call only if the telephone service is available and you have an
optional keypad microphone. Refer to "MAKING A DTMF CALL" on page 17. Consult your dealer
for further details.
1 Select the desired system and group using the System and Group keys.
2 Press and hold the PTT switch for approximately 1 second to ensure a
connection.
• Confirm that there is a dial tone after releasing the PTT switch.
3 Dial using the microphone keypad.
• After dialing, wait for a response from the called party.
4 When the called party responds, press the PTT switch and speak into the
microphone. Release the PTT switch to receive.
• Only one person can speak at a time.
5 To end the call, press the # key or the key programmed as Tel
Disconnect.
TRUNKING FORMAT
9